Blog

To ensure the operation and maintenance of the switch, the business and management VLANs are planned, and the remote/local remote ports of the switch

I. IP address Configuration The IP address is configured using HiDiscovery software. The configuration process is as follows: 1. Double-click to insta

Note: It is recommended to use Firefox and install JAVA to scan the current switch through HiDiscovery software. If the switch does not have an IP add

The significance of industrial switch ring network configuration is to improve network reliability, enhance fault tolerance and self-healing capabilit

Note: First disconnect the switch ring network and make the network into a bus structure to avoid physical rings causing network storms. Set all the D

Note: RSTP will conflict with the ring protocol when it is enabled. When planning, pay attention to the design of the Layer 2 redundancy solution, whe

First, prepare a USB flash drive and unzip the firmware to the root directory of the USB flash drive. Taking the MS20 switch version E as an example,

The second-layer redundancy technologies solved in the network include MRP ring and STP including Coupling technology, as well as the third-layer redu

The premise must be a layer 3 switch. Port-based routing cannot identify VLANs and will reject VLAN routing packets marked with T.

Port security MAC address binding Double-click the cell in the "Allowed MAC Addresses" column of the row corresponding to the port, enter th

Configuration Roadmap In Enabled, check the source port (the port that needs to be mirrored) In the Destination Port drop-down menu, select the destin

In this article, we will take a detailed look at Phoenix Contact PTSM 0.5-2.5 connectors, their characteristics, applications and advantages. You will