+8613606913517
info@ele-supply.com
enLanguage
Moxa ICF-1150I-S-SC

Moxa ICF-1150I-S-SC

Moxa ICF-1150I-S-SC serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. Moxa ICF-1150I-S-SC products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.
Send Inquiry

Moxa ICF-1150I-S-SC Industrial RS-232/422/485 to fiber converters

Introduction

 

Moxa ICF-1150I-S-SC serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, models with isolation protection are also available to enhance noise immunity. Moxa ICF-1150I-S-SC products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

 

Three-Way Communication

Moxa ICF-1150I-S-SC supports 2 serial ports, with a DB9 connector for RS-232 communication and a removable terminal block for RS-422 or RS- 485 communication. The 3 ports (2 serial ports and one fiber port) are completely independent. When an ICF-1150 converter receives data from any one port, it will send the data through the other 2 ports. For example, once the ICF-1150 converter receives a command from the remote master through the fiber port, it will convert the signal and send the command through the RS-232 and RS-422/485 ports at the same time. If the user is monitoring a system running on an RS-485 network, there is no need to use an additional RS-232 to RS-485 converter to connect the laptop computer's serial port to the RS-485 bus.

 

Rotary Switch for Setting the Pull High/Low Resistor

The RS-485 interface supports multidrop or daisy-chain connections, which system engineers will use to connect serial devices such as meters, RTUs, and readers, together on the same bus. Since the number of serial devices on the same bus will cause the impedance of the data line to increase, the ICF-1150 allows users to tune the pull high/low resistor. Just rotate the switch to the appropriate value without removing the ICF-1150 from the DIN rail.

 

Features and Benefits

  • 3-way communication: RS-232, RS-422/485, and fiber
  • Rotary switch to change the pull high/low resistor value
  • Extends RS-232/422/485 transmission up to 40 km with single-mode or 5 km with multi-mode
  • -40 to 85°C wide-temperature range models available
  • C1D2, ATEX, and IECEx certified for harsh industrial environments

 

Specifications

 

Serial Interface

No. of Ports

2

Serial Standards

RS-232

RS-422

RS-485

Baudrate

50 bps to 921.6 kbps (supports non-standard baudrates)

Flow Control

ADDC (automatic data direction control) for RS-485

Connector

DB9 female for RS-232 interface

pin terminal block for RS-422/485 interface

Fiber ports for RS-232/422/485 interface

Isolation

2 kV (I models)

Optical Fiber

Low-Speed Fiber Module

Multi-Mode

Single-Mode

Fiber Cable Requirements

50/125 µm, 800 MHz

G.652

62.5/125 µm, 500 MHz

Typical Distance

5 km

40 km

Wavelength

Typical (nm)

850

1310

TX Range (nm)

840 to 860

1290 to 1330

RX Range (nm)

800 to 900

1100 to 1650

Optical Power

TX Range (dBm)

0 to -8

0 to -8

RX Range (dBm)

0 to -25

0 to -25

Link Budget (dB)

15

20

Dispersion Penalty (dB)

1

1

Note: When using a power meter to measure the fiber TX power, set the baudrate to 9,600 bps and send data (00, ..., 0h) to the serial converter's serial port.

Pull High/Low Resistor for RS-485

150 kilo-ohm, 10 kilo-ohm, 4.7 kilo-ohm, 3.3 kilo-ohm, 1 kilo-ohm, 909 ohm, 822 ohm,

770 ohm, 500 ohm, 485 ohm

RS-485 Data Direction Control

ADDC (automatic data direction control)

Terminator for RS-485

N/A, 120 ohms, 120 kilo-ohms

 

Serial Signals

RS-232

TxD, RxD, GND

RS-422

Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w

Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

Data+, Data-, GND

 

Power Parameters

Input Current

ICF-1150 Series: 264 mA @ 12 to 48 VDC

ICF-1150I Series: 300 mA @ 12 to 48 VDC

Input Voltage

12 to 48 VDC

No. of Power Inputs

1

Overload Current Protection

Supported

Power Connector

Terminal block

Power Consumption

ICF-1150 Series: 264 mA @ 12 to 48 VDC

ICF-1150I Series: 300 mA @ 12 to 48 VDC

 

Physical Characteristics

Housing

Metal

IP Rating

IP30

Dimensions

30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in)

Weight

330 g (0.73 lb)

Installation

DIN-rail mounting

 

Environmental Limits

Operating Temperature

Standard Models: 0 to 60°C (32 to 140°F)

Wide Temp. Models: -40 to 85°C (-40 to 185°F)

Storage Temperature (package included)

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

 

Standards and Certifications

EMC

EN 55032/35

EMI

CISPR 32, FCC Part 15B Class A

EMS

IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m

IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV

IEC 61000-4-5 Surge: Power: 4 kV; Signal: 1 kV

IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m

IEC 61000-4-8 PFMF

Environmental Testing

IEC 60068-2-1

IEC 60068-2-2

IEC 60068-2-3

Safety

UL 61010-2-201

Vibration

IEC 60068-2-6

Hazardous Locations

IEX Models: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2, IECEx All Other Models: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2

 

MTBF

Time

792,085 hrs

Standards

Telcordia (Bellcore), GB

 

Package Contents

Device

1 x ICF-1150 Series converter

Documentation

1 x quick installation guide 1 x warranty card

 

Dimensions

product-3077-2580

 

Ordering Information

Model Name

Isolation

Operating Temp.

Fiber Module Type

IECEx Supported

ICF-1150-M-ST

–

0 to 60°C

Multi-mode ST

–

ICF-1150-M-SC

–

0 to 60°C

Multi-mode SC

–

ICF-1150-S-ST

–

0 to 60°C

Single-mode ST

–

ICF-1150-S-SC

–

0 to 60°C

Single-mode SC

–

ICF-1150-M-ST-T

–

-40 to 85°C

Multi-mode ST

–

ICF-1150-M-SC-T

–

-40 to 85°C

Multi-mode SC

–

ICF-1150-S-ST-T

–

-40 to 85°C

Single-mode ST

–

ICF-1150-S-SC-T

–

-40 to 85°C

Single-mode SC

–

ICF-1150I-M-ST

2 kV

0 to 60°C

Multi-mode ST

–

ICF-1150I-M-SC

2 kV

0 to 60°C

Multi-mode SC

–

ICF-1150I-S-ST

2 kV

0 to 60°C

Single-mode ST

–

ICF-1150I-S-SC

2 kV

0 to 60°C

Single-mode SC

–

ICF-1150I-M-ST-T

2 kV

-40 to 85°C

Multi-mode ST

–

ICF-1150I-M-SC-T

2 kV

-40 to 85°C

Multi-mode SC

–

ICF-1150I-S-ST-T

2 kV

-40 to 85°C

Single-mode ST

–

ICF-1150I-S-SC-T

2 kV

-40 to 85°C

Single-mode SC

–

ICF-1150-M-ST-IEX

–

0 to 60°C

Multi-mode ST

√

ICF-1150-M-SC-IEX

–

0 to 60°C

Multi-mode SC

√

ICF-1150-S-ST-IEX

–

0 to 60°C

Single-mode ST

√

ICF-1150-S-SC-IEX

–

0 to 60°C

Single-mode SC

√

ICF-1150-M-ST-T-IEX

–

-40 to 85°C

Multi-mode ST

√

ICF-1150-M-SC-T-IEX

–

-40 to 85°C

Multi-mode SC

√

ICF-1150-S-ST-T-IEX

–

-40 to 85°C

Single-mode ST

√

ICF-1150-S-SC-T-IEX

–

-40 to 85°C

Single-mode SC

√

ICF-1150I-M-ST-IEX

2 kV

0 to 60°C

Multi-mode ST

√

ICF-1150I-M-SC-IEX

2 kV

0 to 60°C

Multi-mode SC

√

ICF-1150I-S-ST-IEX

2 kV

0 to 60°C

Single-mode ST

√

ICF-1150I-S-SC-IEX

2 kV

0 to 60°C

Single-mode SC

√

ICF-1150I-M-ST-T-IEX

2 kV

-40 to 85°C

Multi-mode ST

√

ICF-1150I-M-SC-T-IEX

2 kV

-40 to 85°C

Multi-mode SC

√

ICF-1150I-S-ST-T-IEX

2 kV

-40 to 85°C

Single-mode ST

√

ICF-1150I-S-SC-T-IEX

2 kV

-40 to 85°C

Single-mode SC

√

 

Accessories (sold separately)

 

Power Supplies

DR-4524

45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120 to 370 VDC input, -10 to 50° C operating temperature

 

Cables

CBL-F9M9-20

DB9 female to DB9 male serial cable, 20 cm

CBL-F9M9-150

DB9 female to DB9 male serial cable, 1.5 m

 

Hot Tags: moxa icf-1150i-s-sc, China, wholesale, online, order, eds 208 m sc moxa, moxa rs232 rs485, mgate 5118, Moxa PT 7528 Series, Moxa EDS 3055 M SC, nport 5650