Moxa MGate 5111
Moxa MGate 5111

Moxa MGate 5111

Moxa MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.
Send Inquiry

Moxa MGate 5111 1-port Modbus/PROFINET/EtherNet/IP to PROFIBUS slave gateways

 

Introduction

 

Moxa MGate 5111 industrial Ethernet gateways convert data from Modbus RTU/ASCII/TCP, EtherNet/IP, or PROFINET to PROFIBUS protocols. All models are protected by a rugged metal housing, are DIN-rail mountable, and offer built-in serial isolation.

Modbus is one of the most widely used industrial communication protocols, and EtherNet/IP, PROFINET, and PROFIBUS are commonly used in factory automation and process automation. Moxa MGate 5111 supports both Modbus RTU/ASCII/TCP master and slave modes, so that you can easily connect your Modbus device to PROFIBUS PLCs or DCSs, such as Siemens PLCs.

For system integration, Moxa MGate 5111 can connect to EtherNet/IP PLC/SCADA systems, such as Rockwell Automation PLCs, to PROFIBUS PLC/ DCS systems, or between a new Siemens PLC system that supports PROFINET to an existing PROFIBUS system. Moxa MGate 5111 gateways are designed for easy configuration and quick maintenance. A handy web console can be used to implement remote maintenance tasks, and the configuration wizard UI lets you quickly set up your gateway. A comprehensive collection of troubleshooting tools reduce configuration time and system downtime. The rugged design is suitable for industrial applications, such as factory automation, power, oil and gas, water and wastewater, and other process automation industries.

 

Easy Configuration

Moxa MGate 5111 Series has a user-friendly interface that lets you quickly set up protocol conversion routines for most applications, doing away with what were often time-consuming tasks in which users had to implement detailed parameter configurations one by one. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps.

Moxa MGate 5111 supports a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, system monitoring functions are provided to record network connections and system log events.

 

A Variety of Maintenance Functions

Moxa MGate 5111 supports Protocol Diagnose and Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues caused by incorrect software parameters, such as slave IDs and register addresses, or incorrect command configurations, can be fished out with Protocol Diagnose and Traffic Monitoring, which let you capture and check data to easily identify root causes.

Moxa MGate 5111 gateways also support status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators. When a PROFIBUS cable gets disconnected, the fault protection function executes actions on end devices identified by a predefined value set by the user.

 

Features and Benefits

  • Converts Modbus, PROFINET, or EtherNet/IP to PROFIBUS
  • Supports PROFIBUS DP V0 slave
  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports EtherNet/IP Adapter
  • Supports PROFINET IO device
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting
  • Status monitoring and fault protection for easy maintenance
  • microSD card for configuration backup/duplication and event logs
  • Supports redundant dual DC power inputs and 1 relay output
  • Serial port with 2 kV isolation protection
  • -40 to 75°C wide operating temperature models available
  • Security features based on IEC 62443

 

Specifications

 

Ethernet Interface

10/100BaseT(X) Ports (RJ45 connector)

2

Auto MDI/MDI-X connection

Magnetic Isolation Protection

1.5 kV (built-in)

 

Ethernet Software Features

Industrial Protocols

Modbus TCP Client (Master) Modbus TCP Server (Slave) PROFINET IO Device EtherNet/IP Adapter

Configuration Options

Web Console (HTTP/HTTPS) Device Search Utility (DSU) Telnet Console

Management

ARP

DHCP Client DNS

HTTP HTTPS SMTP

SNMP Trap SNMPv1/v2c/v3 TCP/IP

Telnet SSH UDP

NTP Client

MIB

RFC1213, RFC1317

Time Management

NTP Client

 

Serial Interface

Console Port

RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

No. of Ports

1

Connector

DB9 male

Serial Standards

RS-232/422/485

Baudrate

50 bps to 921.6 kbps

Data Bits

7, 8

Parity

None Even Odd Space Mark

Stop Bits

1, 2

Flow Control

RTS Toggle (RS-232 only) RTS/CTS

RS-485 Data Direction Control

Automatic Data Direction Control (ADDC)

Pull High/Low Resistor for RS-485

1 kilo-ohm, 150 kilo-ohms

Terminator for RS-485

120 ohms

Isolation

2 kV (built-in)

 

Serial Signals

RS-232

TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422

Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w

Data+, Data-, GND

RS-485-4w

Tx+, Tx-, Rx+, Rx-, GND

 

Serial Software Features

Configuration Options

Serial Console

Industrial Protocols

PROFIBUS DP-V0 Slave

Modbus RTU/ASCII Master

Modbus RTU/ASCII Slave

 

Modbus RTU/ASCII

Mode

Master, Slave

Functions Supported

1, 2, 3, 4, 5, 6, 15, 16, 23

Max. No. of Commands

128

Input Data Size

2048 bytes

Output Data Size

2048 bytes

 

Modbus TCP

Mode

Client (Master), Server (Slave)

Functions Supported

1, 2, 3, 4, 5, 6, 15, 16, 23

Max. No. of Client Connections

16

Max. No. of Server Connections

32

Max. No. of Commands

128

Input Data Size

2048 bytes

Output Data Size

2048 bytes

 

PROFIBUS Interface

Industrial Protocols

PROFIBUS DP

No. of Ports

1

Connector

DB9 female

Baudrate

9600 bps to 12 Mbps

Isolation

2 kV (built-in)

Signals

PROFIBUS D+, PROFIBUS D-, RTS, Signal Common, 5V

 

PROFIBUS

Rotary Switch

PROFIBUS addresses 0-99 (addresses 100-125 supported through software configuration)

Mode

DP-V0 Slave

Max. No. of Master Connections

1

Max. No. of PROFIBUS I/O Modules

24

Input Data Size

244 bytes

Output Data Size

244 bytes

 

PROFINET

Mode

IO Device

Max. No. of IO Controller Connections

1 (for read/write)

Input Data Size

512

Output Data Size

512

 

EtherNet/IP

Mode

Adapter

CIP Objects Supported

Identity Message

Router Assembly

Connection Manager TCP/IP interface

Ethernet link

Port

Max. No. of Scanner Connections

1 (for read-only), 1 (for read/write)

Input Data Size

496 bytes

Output Data Size

496 bytes

 

Memory

microSD Slot

Up to 32 GB (SD 2.0 compatible)

 

Power Parameters

Input Voltage

12 to 48 VDC

Input Current

416 mA @ 12 VDC

Power Connector

Spring-type Euroblock terminal

 

Relays

Contact Current Rating

Resistive load: 2 A @ 30 VDC

 

Physical Characteristics

Housing

Metal

IP Rating

IP30

Dimensions

45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in)

Weight

589 g (1.30 lb)

 

Environmental Limits

Operating Temperature

MGate 5111: 0 to 60°C (32 to 140°F) MGate 5111-T: -40 to 75°C (-40 to 167°F)

Storage Temperature (package included)

-40 to 85°C (-40 to 185°F)

Ambient Relative Humidity

5 to 95% (non-condensing)

 

Standards and Certifications

EMC

EN 61000-6-2/-6-4

EMI

CISPR 32, FCC Part 15B Class A

EMS

IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV

IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m

IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV

IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV

IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m

IEC 61000-4-8 PFMF

Safety

EN 62368-1

UL 61010-2-201

Hazardous Locations

ATEX

Class I Division 2 IECEx

Freefall

IEC 60068-2-32

Shock

IEC 60068-2-27

Vibration

IEC 60068-2-6

IEC 60068-2-64

 

MTBF

Time

718,131 hrs

Standards

Telcordia SR332

 

Package Contents

Device

1 x MGate 5111 Series gateway

Installation Kit

1 x DIN-rail kit

Documentation

1 x quick installation guide

1 x warranty card

 

Ordering Information

Model Name

Operating Temp.

MGate 5111

0 to 60°C

MGate 5111-T

-40 to 75°C

 

Accessories (sold separately)

 

Cables

CBL-F9M9-150

DB9 female to DB9 male serial cable, 1.5 m

CBL-F9M9-20

DB9 female to DB9 male serial cable, 20 cm

CBL-RJ45F9-150

8-pin RJ45 to DB9 female serial cable, 1.5m

CBL-RJ45SF9-150

8-pin RJ45 to DB9 female serial cable with shielding, 1.5m

 

Connectors

Mini DB9F-to-TB

DB9 female to terminal block connector

 

Wall-Mounting Kits

WK-51-01

Wall mounting kit with 2 plates (51.6 x 67 x 2 mm) and 6 screws

 

Power Cords

CBL-PJTB-10

Non-locking barrel plug to bare-wire cable

 

Hot Tags: moxa mgate 5111, China, wholesale, online, order, eds g512e 4gsfp, mgate 5119, nport6150, eds 510a, nport 5650, moxa 5650 16