Serial Port Management Of Switches

Nov 04, 2024 Leave a message

The network management switch comes with a serial cable for switch management. First, plug one end of the serial cable into the serial port on the back of the switch, and the other end into the serial port of a regular computer. Then connect the switch and computer power. The "HyperTerminal" program is provided in both Windows 98 and Windows 2000. Open the "Super Terminal" and after setting the connection parameters, you can interact with the switch through the serial cable. This method does not occupy the bandwidth of the switch, so it is called "Out of band management".
Under this management approach, the switch provides a menu driven console interface or command-line interface. You can use the "Tab" or arrow keys to navigate through menus and submenus, press enter to execute the corresponding command, or use a dedicated switch management command set to manage switches. The command sets for switches of different brands are different, and even switches of the same brand have different commands. Using menu commands is more convenient in operation.

 

news-400-300