Moxa AWK-1137C-EU Industrial 802.11a/b/g/n wireless client
Introduction
Moxa AWK-1137C-EU is an ideal client solution for industrial wireless mobile applications. It enables WLAN connections for both Ethernet and serial devices, and is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. Moxa AWK-1137C-EU can operate on either the 2.4 or 5 GHz bands, and is backwards-compatible with existing 802.11a/b/g deployments to future- proof your wireless investments. The Wireless add-on for the MXview network management utility visualizes the AWK's invisible wireless connections to ensure wall-to-wall Wi-Fi connectivity.
Features and Benefits
- IEEE 802.11a/b/g/n compliant client
- Comprehensive interfaces with one serial port and two Ethernet LAN ports
- Millisecond-level Client-based Turbo Roaming1
- Easy setup and deployment with AeroMag
- 2x2 MIMO future-proof technology
- Easy network setup with Network Address Translation (NAT)
- Integrated robust antenna and power isolation
- Anti-vibration design
- Compact size for your industrial applications
1. The Turbo Roaming recovery time indicated herein is an average of test results documented, in optimized conditions, across APs configured with interference-free 20-MHz RF channels, WPA2-PSK security, and default Turbo Roaming parameters. The clients are configured with 3-channel roaming at 100 Kbps traffic load. Other conditions may also impact roaming performance. For more information about Turbo Roaming parameter settings, refer to the product manual.
Industrial Ruggedness
Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference
-40 to 75°C wide operating temperature models (-T) available for smooth wireless communication in harsh environments
Mobility-oriented Design
Client-based Turbo Roaming1 for < 150 ms roaming recovery time between APs
MIMO technology to ensure transmitting and receiving capability while on the move
Anti-vibration performance (with reference to IEC 60068-2-6)
Easy Integration
Semi-automatically configurable to reduce deployment cost
AeroMag support for error-free setup of your industrial applications' basic WLAN settings
Various communication interfaces for connecting to different types of devices
One-to-many NAT to simplify your machine setup
Wireless Network Management With MXview Wireless
Dynamic topology view shows the status of wireless links and connection changes at a glance
Visual, interactive roaming playback function to review the roaming history of clients
Detailed device information and performance indicator charts for individual AP and client devices
Specifications
WLAN Interface
|
WLAN Standards |
802.11a/b/g/n 802.11i Wireless Security |
||||||||||||||||||||||||||||
|
Modulation Type |
DSSS OFDM MIMO-OFDM |
||||||||||||||||||||||||||||
|
Frequency Band for US (20 MHz operating channels) |
2.412 to 2.462 GHz (11 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)2 5.500 to 5.700 GHz (11 channels)2 5.745 to 5.825 GHz (5 channels) |
||||||||||||||||||||||||||||
|
Frequency Band for EU (20 MHz operating channels) |
2.412 to 2.472 GHz (13 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)2 5.500 to 5.700 GHz (11 channels)2 |
||||||||||||||||||||||||||||
|
Frequency Band for JP (20 MHz operating channels) |
2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels) 5.260 to 5.320 GHz (4 channels)2 5.500 to 5.700 GHz (11 channels)2 |
||||||||||||||||||||||||||||
|
Wireless Security |
WEP encryption (64-bit and 128-bit) WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2-Personal |
||||||||||||||||||||||||||||
|
Transmission Rate |
802.11b: 1 to 11 Mbps 802.11a/g: 6 to 54 Mbps 802.11n: 6.5 to 300 Mbps |
||||||||||||||||||||||||||||
|
Transmitter Power for 802.11a |
23±1.5 dBm @ 6 to 24 Mbps 21±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 18±1.5 dBm @ 54 Mbps |
||||||||||||||||||||||||||||
|
Transmitter Power for 802.11n (5 GHz) |
23±1.5 dBm @ MCS0/8 20 MHz 18±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 18±1.5 dBm @ MCS7/15 40 MHz |
||||||||||||||||||||||||||||
|
Transmitter Power for 802.11b |
26±1.5 dBm @ 1 Mbps 26±1.5 dBm @ 2 Mbps 26±1.5 dBm @ 5.5 Mbps 25±1.5 dBm @ 11 Mbps |
||||||||||||||||||||||||||||
|
Transmitter Power for 802.11g |
23±1.5 dBm @ 6 to 24 Mbps 22±1.5 dBm @ 36 Mbps 20±1.5 dBm @ 48 Mbps 19±1.5 dBm @ 54 Mbps |
||||||||||||||||||||||||||||
|
Transmitter Power for 802.11n (2.4 GHz) |
23±1.5 dBm @ MCS0/8 20 MHz 17±1.5 dBm @ MCS7/15 20 MHz 23±1.5 dBm @ MCS0/8 40 MHz 17±1.5 dBm @ MCS7/15 40 MHz |
||||||||||||||||||||||||||||
|
Transmitter Power |
|
||||||||||||||||||||||||||||
|
Receiver Sensitivity for 802.11a (measured at 5.680 GHz) |
Typ. -90 @ 6 Mbps Typ. -88 @ 9 Mbps Typ. -87 @ 12 Mbps Typ. -85 @ 18 Mbps Typ. -81 @ 24 Mbps Typ. -78 @ 36 Mbps Typ. -74 @ 48 Mbps Typ. -73 @ 54 Mbps Note3 |
||||||||||||||||||||||||||||
|
Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) |
Typ. -69 dBm @ MCS7 20 MHz Typ. -70 dBm @ MCS15 20 MHz Typ. -64 dBm @ MCS7 40 MHz Typ. -66 dBm @ MCS15 40 MHz Note3 |
||||||||||||||||||||||||||||
|
Receiver Sensitivity for 802.11b (measured at 2.437 GHz) |
Typ. -89 dBm @ 1 Mbps Typ. -89 dBm @ 2 Mbps Typ. -89 dBm @ 5.5 Mbps Typ. -88 dBm @ 11 Mbps |
||||||||||||||||||||||||||||
|
Receiver Sensitivity for 802.11g (measured at 2.437 GHz) |
Typ. -88 dBm @ 6 Mbps Typ. -88 dBm @ 9 Mbps Typ. -88 dBm @ 12 Mbps Typ. -87 dBm @ 18 Mbps Typ. -84 dBm @ 24 Mbps Typ. -81 dBm @ 36 Mbps Typ. -77 dBm @ 48 Mbps Typ. -75 dBm @ 54 Mbps |
||||||||||||||||||||||||||||
|
Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) |
Typ. -70 dBm @ MCS7 20 MHz Typ. -70 dBm @ MCS15 20 MHz Typ. -64 dBm @ MCS7 40 MHz Typ. -65 dBm @ MCS15 40 MHz |
||||||||||||||||||||||||||||
|
WLAN Operation Mode |
Client, Client-Router, Slave, Sniffer |
||||||||||||||||||||||||||||
|
Antenna |
External, 2/2 dBi, Omni-directional |
||||||||||||||||||||||||||||
|
Antenna Connectors |
2 RP-SMA female |
||||||||||||||||||||||||||||
2. DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
3. Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
Ethernet Interface
|
10/100BaseT(X) Ports (RJ45 connector) |
2 |
|
Standards |
IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.1Q for VLAN Tagging |
Ethernet Software Features
|
Management |
DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXview Wireless, MXconfig |
|
Routing |
Port forwarding, Static Route, NAT |
|
Security |
HTTPS/SSL, RADIUS, SSH |
|
Time Management |
NTP Client, SNTP Client |
Firewall
|
Filter |
ICMP, MAC address, IP protocol, Port-based |
Serial Interface
|
Connector |
DB9 male |
|
Serial Standards |
RS-232, RS-422/485, RS-232/422/485 |
|
Operation Modes |
Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP |
|
Data Bits |
5, 6, 7, 8 |
|
Stop Bits |
1, 1.5, 2 |
|
Parity |
None, Even, Odd, Space, Mark |
|
Flow Control |
None, RTS/CTS, XON/XOFF |
|
Baudrate |
75 bps to 921.6 kbps |
|
Serial Data Log |
256 KB |
Serial Signals
|
RS-232 |
TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR |
|
RS-422 |
Tx+, Tx-, Rx+, Rx-, GND |
|
RS-485-2w |
Data+, Data-, GND |
|
RS-485-4w |
Tx+, Tx-, Rx+, Rx-, GND |
LED Interface
|
LED Indicators |
SYS, LAN1, LAN2, WLAN, Serial |
Input/Output Interface
|
Buttons |
Reset button |
Physical Characteristics
|
Housing |
Metal |
|
IP Rating |
IP30 |
|
Dimensions |
77.1 x 115.5 x 26 mm (3.04 x 4.55 x 1.02 in) |
|
Weight |
470 g (1.03 lb) |
|
Installation |
DIN-rail mounting, Wall mounting (with optional kit) |
Power Parameters
|
Input Voltage |
9 to 30 VDC |
|
Power Connector |
1 removable 3-contact terminal block(s) |
|
Power Consumption |
11.7 W (max.) |
|
Reverse Polarity Protection |
Supported |
Environmental Limits
|
Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
|
Storage Temperature (package included) |
-40 to 85°C (-40 to 185°F) |
|
Ambient Relative Humidity |
5 to 95% (non-condensing) |
Standards and Certifications
|
EMC |
EN 61000-6-2/-6-4, EN 55032/24 |
|
EMI |
CISPR 22, FCC Part 15B Class A |
|
EMS |
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF |
|
Radio |
EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM |
|
Road Vehicles |
E mark E1 |
|
Safety |
EN 60950-1, UL 60950-1 |
|
Vibration |
IEC 60068-2-6 |
MTBF
|
Time |
1,125,942 hrs |
|
Standards |
Telcordia SR332 |
Package Contents
|
Device |
1 x AWK-1137C Series wireless client |
|
Installation Kit |
1 x DIN-rail kit |
|
Antenna |
2 x 2.4/5 GHz antenna |
|
Documentation |
1 x quick installation guide 1 x warranty card |
Ordering Information
|
Model Name |
Band |
Standards |
Operating Temp. |
|
AWK-1137C-EU |
EU |
802.11a/b/g/n |
0 to 60°C |
|
AWK-1137C-EU-T |
EU |
802.11a/b/g/n |
-40 to 75°C |
|
AWK-1137C-JP |
JP |
802.11a/b/g/n |
0 to 60°C |
|
AWK-1137C-JP-T |
JP |
802.11a/b/g/n |
-40 to 75°C |
|
AWK-1137C-US |
US |
802.11a/b/g/n |
0 to 60°C |
|
AWK-1137C-US-T |
US |
802.11a/b/g/n |
-40 to 75°C |
Accessories (sold separately)
Antennas
|
ANT-WDB-ONF-0709 |
7 dBi at 2.4 GHz or 9 dBi at 5 GHz, N-type (female), dual-band, omnidirectional antenna |
|
ANT-WDB-ANM-0306 |
3 dBi at 2.4 GHz or 6 dBI at 5 GHz, N-type (male), omnidirectional antenna |
|
ANT-WDB-ONM-0707 |
07 dBi at 2.4 GHz and 07 dBi at 5 GHz, N-type (male), dual-band omnidirectional antenna |
|
ANT-WDB-ANM-0502 |
5 dBi at 2.4 GHz or 2 dBI at 5 GHz, N-type (male), omnidirectional antenna |
|
ANT-WDB-ARM-02 |
2 dBi at 2.4 GHz or 2 dBi at 5 GHz, RP-SMA (male) omnidirectional rubber-duck antenna |
|
ANT-WDB-ARM-0202 |
2 dBi at 2.4 GHz or 2 dBi at 5 GHz, RP-SMA (male), dual-band, omnidirectional antenna |
|
ANT-WDB-PNF-1011 |
10 dBi at 2.4 GHz and 11 dBi at 5 GHz, N-type (female), dual-band directional antenna |
|
MAT-WDB-CA-RM-2-0205 |
2.4/5 GHz, ceiling antenna, 2/5 dBi, MIMO 2x2, RP-SMA-type (male) |
|
MAT-WDB-DA-RM-2-0203-1m |
2.4/5 GHz, desktop antenna, 2/3 dBi, MIMO 2x2, RP-SMA-type (male), 1 m cable |
|
MAT-WDB-PA-NF-2-0708 |
2.4/5 GHz, panel antenna, 7/8 dBi, MIMO 2x2, N-type (female) |
|
ANT-WSB5-PNF-16 |
16 dBi at 5 GHz, N-type (female), single-band directional antenna |
|
ANT-WSB-PNF-12-02 |
12 dBi at 2.4 GHz, N-type (female), single-band directional antenna |
|
ANT-WSB-AHRM-05-1.5m |
5 dBi at 2.4 GHz, RP-SMA (male), omnidirectional/dipole antenna, 1.5 m cable |
Wireless Antenna Cables
|
A-CRF-RFRM-J1-60 |
RP-SMA (male) to RP-SMA (female) with JSF-141 cable, 0.6m |
|
A-CRF-RFRM-R4-150 |
RF magnetic base, RP-SMA (male) to RP-SMA (female) RG-174/U cable, 1.5 m |
|
A-CRF-RMNM-L1-300 |
N-type (male) to RP SMA (male) LMR-195 Lite cable, 3 m |
|
A-CRF-RMNM-L1-600 |
N-type (male) to RP SMA (male) LMR-195 Lite cable, 6 m |
|
A-CRF-RMNM-L1-900 |
N-type (male) to RP SMA (male) LMR-195 Lite cable, 9 m |
Surge Arrestors
|
A-SA-NFNF-02 |
0 to 6 GHz, N-type (female) to N-type (female) surge arrester |
|
A-SA-NMNF-02 |
0 to 6 GHz, N-type (male) to N-type (female) surge arrester |
Wireless Adapters
|
A-ADP-RJ458P-DB9F-ABC01 |
DB9 female to RJ45 connector for the ABC-01 Series |
Wireless Terminating Resistors
|
A-TRM-50-NM |
50-ohm termination resistor with N-type male connector |
Wall-Mounting Kits
|
WK-35-01 |
Wall-mounting kit with 2 plates (35 x 44 x 2.5 mm) and 6 screws |
Hot Tags: moxa awk-1137c-eu, China, wholesale, online, order, mini db9f to tb, uport 407, moxa nport 5650, eds 205a s sc, edr 810 2gsfp, moxa nport ia5250a





