MOXA ioLogik E1240 Industrial Grade Ethernet Remote I/O

Introduction

The MOXA ioLogik E1240 supports commonly used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. SNMP or RESTful API protocols are typically used by IT engineers, while OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O enables both IT and OT engineers to conveniently retrieve data from the same I/O device. The MOXA ioLogik E1240 supports six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. It retrieves I/O data and converts it to any of these protocols simultaneously, making it easy and effortless to connect your applications.

Specifications

Features and Benefits

The device offers user-definable Modbus TCP Slave
addressing and supports RESTful API for IIoT applications.
It also supports EtherNet/IP Adapter
and features a 2-port Ethernet switch for daisy-chain topologies.
Peer-to-peer communications help save time and wiring costs. Metrics and units are adhered to throughout the text.
The device actively communicates with MX-AOPC UA Server
and supports SNMP v1/v2c.
Easy mass deployment and configuration can be achieved using the ioSearch utility.
Configuration can be done easily through a web browser.
I/O management is simplified with the MXIO library for Windows or Linux.
The product is certified for Class I Division 2 and ATEX Zone 2.
Wide operating temperature models are available for environments ranging from -40 to 75°C (-40 to 167°F).

Input/Output Interface

Digital Input Channels	ioLogik E1210 Series: 16 ioLogik E1212/E1213 Series: 8 ioLogik E1214 Series: 6 ioLogik E1242 Series: 4
Digital Output Channels	ioLogik E1211 Series: 16 ioLogik E1213 Series: 4
Configurable DIO Channels (by jumper)	ioLogik E1212 Series: 8 ioLogik E1213/E1242 Series: 4
Relay Channels	ioLogik E1214 Series: 6
Analog Input Channels	ioLogik E1240 Series: 8 ioLogik E1242 Series: 4
Analog Output Channels	ioLogik E1241 Series: 4
RTD Channels	ioLogik E1260 Series: 6
Thermocouple Channels	ioLogik E1262 Series: 8
Isolation	3k VDC or 2k Vrms
Buttons	Reset button

Digital Inputs

Connector	Screw-fastened Euroblock terminal
Sensor Type	Dry contact Wet contact (NPN or PNP)
I/O Mode	DI or event counter
Dry Contact	On: short to GND Off: open
Wet Contact (DI to COM)	On: 10 to 30 VDC Off: 0 to 3 VDC
Counter Frequency	250 Hz
Digital Filtering Time Interval	Software configurable
Points per COM	ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels

Digital Outputs

Connector	Screw-fastened Euroblock terminal
I/O Type	ioLogik E1211/E1212/E1242 Series: Sink ioLogik E1213 Series: Source
I/O Mode	DO or pulse output
Current Rating	ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel
Pulse Output Frequency	500 Hz (max.)
Over-Current Protection	ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Over-Voltage Protection	35 VDC

Relays

Connector	Screw-fastened Euroblock terminal
Type	Form A (N.O.) power relay
I/O Mode	Relay or pulse output
Pulse Output Frequency	0.3 Hz at rated load (max.)
Contact Current Rating	Resistive load: 5A @ 30 VDC, 250 VAC, 110 VAC
Contact Resistance	100 milli-ohms (max.)
Mechanical Endurance	5,000,000 operations
Electrical Endurance	100,000 operations @ 5A resistive load
Breakdown Voltage	500 VAC
Initial Insulation Resistance	1,000 mega-ohms (min.) @ 500 VDC
Note	Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.

Physical Characteristics

Housing	Plastic
Dimensions	27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight	200 g (0.44 lb)
Installation	DIN-rail mounting, Wall mounting
Wiring	I/O cable, 16 to 26 AWG Power cable, 12 to 24 AWG

Environmental Limits

Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	4000 m

MOXA ioLogik E1240 Available Models

Model Name	Input/Output Interface	Digital Output Type	Operating Temp.
ioLogik E1210	16 x DI	-	-10 to 60°C
ioLogik E1210-T	16 x DI	-	-40 to 75°C
ioLogik E1211	16 x DO	Sink	-10 to 60°C
ioLogik E1211-T	16 x DO	Sink	-40 to 75°C
ioLogik E1212	8 x DI, 8 x DIO	Sink	-10 to 60°C
ioLogik E1212-T	8 x DI, 8 x DIO	Sink	-40 to 75°C
ioLogik E1213	8 x DI, 4 x DO, 4 x DIO	Source	-10 to 60°C
ioLogik E1213-T	8 x DI, 4 x DO, 4 x DIO	Source	-40 to 75°C
ioLogik E1214	6 x DI, 6 x Relay	-	-10 to 60°C
ioLogik E1214-T	6 x DI, 6 x Relay	-	-40 to 75°C
ioLogik E1240	8 x AI	-	-10 to 60°C
ioLogik E1240-T	8 x AI	-	-40 to 75°C
ioLogik E1241	4 x AO	-	-10 to 60°C
ioLogik E1241-T	4 x AO	-	-40 to 75°C
ioLogik E1242	4 DI, 4 x DIO, 4 x AI	Sink	-10 to 60°C
ioLogik E1242-T	4 DI, 4 x DIO, 4 x AI	Sink	-40 to 75°C
ioLogik E1260	6 x RTD	-	-10 to 60°C
ioLogik E1260-T	6 x RTD	-	-40 to 75°C
ioLogik E1262	8 x TC	-	-10 to 60°C
ioLogik E1262-T	8 x TC	-	-40 to 75°C