Weidmüller DC Power Backup Overall Solution

Jul 15, 2025 Leave a message

When the 24 V DC power output of the equipment is lost, the UPS backup power supply can provide a stable 24 V DC output to ensure the power supply for the load equipment to operate stably within the set time.

 

This article will give you a brief introduction to Weidmüller's power backup solutions and products.

 

 

Why do you need a power backup solution?

 

 

info-554-112

info-20-20

1. Grid quality and its fluctuations

info-20-20

2. Backup of key equipment and process information

info-20-20

3. Personal safety and avoid damage and reduce losses

 

 

Weidmüller power backup solutions and products

 

 

1. Power products: PRO TOP, PRO MAX, PRO ECO…

 

info-480-214

 

Ultra-short power grid interruption solutions;

Guide rail power supply: 20ms power-off maintenance time;

Tablet power supply: power-off maintenance time of more than 10ms.

 

 

2. DC buffer module

Energy storage and constant voltage discharge, can be used as a small uninterruptible power supply, the input side is connected to a 24VDC switching power supply or other 24VDC equipment, the DC Buffer stores energy during normal operation of the power supply;

 

Once the input 24VDC is disconnected, the DC Buffer starts to release energy immediately and provides a stable output voltage to the load, maintaining continuous power supply to the load for a certain period of time;

 

info-554-263

 

3. DC UPS + Lead-acid battery

Difference from DC buffer: The DC buffer solution is simple and can be directly connected in parallel with the DC output of the power supply product to achieve a short-term (<60s) power backup solution; but for power backup solutions that require minutes or even hours, a DC UPS and lead-acid battery products of different capacities are needed to meet the requirements.

 

DC UPS with lead-acid batteries provides a 24VDC long-term backup solution.

Working principle: In normal operation, the power supply is supplied to the electrical equipment through the DC UPS module, and the charging of the connected battery module is managed at the same time; when the power module is powered off or damaged, the DC UPS module automatically switches to the battery module to supply power to the electrical equipment to ensure its necessary working needs. By connecting battery modules of different capacities, DC voltage supply can be achieved for more than minutes to hours.

 

Uninterruptible power supply (UPS) control units are available in two types: 24V 20A/10A and 24V 40A ;

There are five types of battery modules: 24V DC1.2AH , 24V DC3.4AH , 24V DC7AH , 24V DC12AH , and 24V DC17AH .

 

 

Conditions for using different schemes

 

 

info-554-248

 

 

Typical application scenarios

 

 

info-554-270