Question 1
After the computer and Moxa NPort device are directly connected via an Ethernet cable, they can be pinged successfully, but the device information cannot be searched in the NPort Administrator software?
1. If the search fails, please confirm whether the NPort Administrator version is the latest and compatible with your current operating system. If the version is too old, please download the latest version of the driver that is compatible with your operating system from the MOXA official website.
Download address:
https://www.moxa.com.cn/support/search?psid=50254
Click Help - About Administrator... to view the current software version information.


2. If the current software is the latest version, but still cannot find the information of NPort device, you can choose to download another driver software from MOXA official website – NPort Windows Driver Manager to search, download address:
https://www.moxa.com.cn/support/search?psid=50254
Question 2
In Real Com mode, the device information cannot be found in the NPort Administrator software. How to add a COM port?
Offline COM mapping can be used without physically connecting the NPort to the network. Offline COM mapping can solve different field problems and reduce the workload of system integrators. With offline mapping, users can first install the driver for the host and then install the NPort to different fields. The specific setup steps are as follows:
①Click COM Mapping - Add

②Enter the IP address and select the model name to add the target, then click OK

③ The device information and mapped COM port number in blue font will appear on the interface. Click Apply to make the settings take effect.

④A pop-up window will appear when the mapping is successful. Click OK to complete the mapping.

Test whether the mapped COM port can be used normally:
Ensure that the serial port of the NPort device is set to Real Com mode. After configuring the corresponding serial port parameters, you can use the PComm debugging software for testing.
Test wiring: Connect the NPort device network port directly to the computer with a network cable, and use a serial port to USB tool to connect the NPort serial port to the PC
Open the PComm software and open the serial port to be tested in Port Manager. You can see that data is being sent and received normally.


