How to log in to the configuration page of a Moxa switch?

Apr 08, 2025 Leave a message

How to log in to the configuration page of a Moxa switch?

 

 

This article describes how to access a Moxa switch for the first time. There are three access methods: serial console, Telnet console, and Web browser. The serial console connection method is to connect the switch to the COM port of the PC with a serial cable. It can be used without knowing the IP address of the switch. The Telnet and Web browser methods are used to access the switch through a LAN or the Internet.

 

 

RS-232 serial console

 

 

I. Preparation​

 

1. It is recommended to use PComm Terminal Emulator software, which can be downloaded for free on the Moxa official website

Download address:

https://www.moxa.com.cn/getmedia/dee5c6e5-e3f1-4560-a5b5-4dd4ddeb7b96/Moxa-pcomm-lite-suite-serial-communication-tool-for-windows-utility-v1.7.zip

 

2. Use an RJ45 to DB9-F cable to connect the RS-232 Console port of the switch to the COM port of the PC (if the PC does not have a serial port, you can use a USB to RS-232 serial port tool).

 

Note: For more information about the console port and console cable, refer to "About the Console Port and Console Cable"

info-554-362

 

II. After the above work is ready, follow the steps below to enter RS-232 Console

 

1. Open the program - PComm Terminal Emulator

info-554-414

 

2. Select "Open" under "Port Manager" to open a new connection

info-554-314

 

3. After the Property window opens, select "Communication Parameter", select the appropriate COM port for the console connection, the baud rate is 115200, 8 data bits, no parity, and 1 stop bit.

info-554-694

 

4. Click Terminal and select VT100 in Terminal Type. Click "Confirm" to continue.

info-554-699

 

5. Press Enter and the Console login interface will appear on the screen. Enter your username and password to log in (the default username is admin and the password is Moxa)

info-554-356

 

 

Telnet Remote Console Configuration

 

 

I. Preparation​

 

1. Connect the switch and PC directly with a network cable

 

2. Modify the Ethernet network card address of the PC connected to the switch to ensure that the PC and the switch belong to the same network segment (the default IP of the switch is 192.168.127.253)

info-554-714

 

II. Follow the steps below to access the Console port via Telnet

 

1. Click Start - Run, and enter the IP address of the switch to be Telneted in the Windows Run window. (Or enter the Telnet command from the MS-DOS prompt command.)

info-554-284

 

2. The login interface will appear on the screen

info-554-301

 

3. Press Enter to enter the account name and password (the default username is admin and the password is Moxa)

info-554-380

 

4. After entering the configuration page, use the up/down arrows to select a category and press Enter to select

info-554-342

 

 

WEB browser configuration

 

 

I. Preparation​

 

1. Connect the switch and PC directly with an Ethernet cable

 

2. Change the Ethernet network card address of the PC connected to the switch to ensure that the PC and the switch belong to the same network segment (the default IP of the switch is 192.168.127.253)

info-400-452

 

II. Follow the steps below to access the switch through a browser

 

1. Open the browser, enter the IP address of the switch, and press Enter

info-554-82

 

2. Enter your username and password and click "Login" to log in

info-554-238

 

3. After entering, click the menu bar on the left to start configuration

info-554-278