Weidmuller TS 35X15/LL 1M/ST/ZN 0236510000
Weidmuller TS 35X15/LL 1M/ST/ZN Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 1000 mm, Height: 35 mm, Depth: 15 mm, Slit width: 5.20 mm, Slit length: 25.00 mm
General ordering data
|
Version |
Terminal rail, Accessories, Steel, galvanic zinc plated and passivated, Width: 1000 mm, Height: 35 mm, Depth: 15 mm, Slit width: 5.20 mm, Slit length: 25.00 mm |
|
Order No. |
0236510000 |
|
Type |
TS 35X15/LL 1M/ST/ZN |
|
GTIN (EAN) |
4008190017699 |
|
Qty. |
10 |
Dimensions and weights
|
Depth |
15 mm |
|
Depth (inches) |
0.591 inch |
|
Height |
35 mm |
|
Height (inches) |
1.378 inch |
|
Width |
1,000 mm |
|
Width (inches) |
39.37 inch |
|
Net weight |
50 g |
Environmental Product Compliance
|
RoHS Compliance Status |
Compliant without exemption |
|
REACH SVHC |
No SVHC above 0.1 wt% |
Mounting rail
|
Drill-hole diameter |
5.2 mm |
|
Installation advice |
Direct mounting |
|
Length of the terminal rail |
min.: 0 mm nominal: 1,000 mm max.: 1,000 mm |
|
Material |
Steel |
|
Pre-punched mounting rail |
Yes |
|
Short circuit strength corresponds to E-Cu wire |
50 mm² |
|
Short-time withstand current per second according to IEC 60947-7-2 |
6 kA |
|
Slit gap |
11 mm |
|
Slit gap |
min.: 11 mm nominal: 11 mm max.: 11 mm |
|
Slit length |
25 mm |
|
Slit length |
min.: 25 mm nominal: 25 mm max.: 25 mm |
|
Slit width |
5.2 mm |
|
Slit width |
min.: 5.2 mm nominal: 5.2 mm max.: 5.2 mm |
|
Slotted drill holes |
Yes |
|
Solder eyelet hole diameter (D) |
5.2 mm |
|
Spacing of holes, centre-to-centre |
36 mm |
|
Standards |
In accordance with DIN EN 60715 |
|
Surface finish |
galvanic zinc plated and passivated |
|
Thickness |
1.5 mm |
