MOXA ioLogik E1214 Industrial Controllers Ethernet Remote I/O
Introduction
The MOXA ioLogik E1214 supports commonly used protocols for retrieving I/O data, making it suitable for a wide range of applications. SNMP or RESTful API protocols are typically used by IT engineers, while OT engineers are more familiar with OT-based protocols such as Modbus and EtherNet/IP. With Moxa's Smart I/O, both IT and OT engineers can conveniently retrieve data from the same I/O device. The MOXA ioLogik E1214 supports six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. It retrieves I/O data and converts it to any of these protocols simultaneously, making it easy to connect your applications.
Specifications
Features and Benefits
Modbus TCP Slave addresses can be defined by the user. Restful API for IIoT applications.
Supports EtherNet/IP Adapter: 2-port Ethernet switch for daisy-chain configurations.
Peer-to-peer communication saves both time and wiring costs.
Active communication with the MX-AOPC UA server. SNMP v1/v2C
The ioSearch utility allows for easy mass deployment and configuration.
Features include web-based configuration, MXIO library for Windows and Linux, and ATEX Zone 2 certification.
Wide operating temperature models are available for -40 to 75°C (-40 to 167°F) environments.
Input/Output Interface
|
Digital Input Channels |
ioLogik E1210 Series: 16 ioLogik E1212/E1213 Series: 8 ioLogik E1214 Series: 6 ioLogik E1242 Series: 4 |
|
Digital Output Channels |
ioLogik E1211 Series: 16 ioLogik E1213 Series: 4 |
|
Configurable DIO Channels (by jumper) |
ioLogik E1212 Series: 8 ioLogik E1213/E1242 Series: 4 |
|
Relay Channels |
ioLogik E1214 Series: 6 |
|
Analog Input Channels |
ioLogik E1240 Series: 8 ioLogik E1242 Series: 4 |
|
Analog Output Channels |
ioLogik E1241 Series: 4 |
|
RTD Channels |
ioLogik E1260 Series: 6 |
|
Thermocouple Channels |
ioLogik E1262 Series: 8 |
|
Isolation |
3k VDC or 2k Vrms |
|
Buttons |
Reset button |
Digital Inputs
|
Connector |
Screw-fastened Euroblock terminal |
|
Sensor Type |
Dry contact Wet contact (NPN or PNP) |
|
I/O Mode |
DI or event counter |
|
Dry Contact |
On: short to GND Off: open |
|
Wet Contact (DI to COM) |
On: 10 to 30 VDC Off: 0 to 3VDC |
|
Counter Frequency |
250 Hz |
|
Digital Filtering Time Interval |
Software configurable |
|
Points per COM |
ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels |
Digital Outputs
|
Connector |
Screw-fastened Euroblock terminal |
|
I/O Type |
ioLogik E1211/E1212/E1242 Series: Sink ioLogik E1213 Series: Source |
|
I/O Mode |
DO or pulse output |
|
Current Rating |
ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel |
|
Pulse Output Frequency |
500 Hz (max.) |
|
Over-Current Protection |
ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C |
|
Over-Temperature Shutdown |
175°C (typical), 150°C (min.) |
|
Over-Voltage Protection |
35 VDC |
Relays
|
Connector |
Screw-fastened Euroblock terminal |
|
Type |
Form A (N.O.) power relay |
|
I/O Mode |
Relay or pulse output |
|
Pulse Output Frequency |
0.3 Hz at rated load (max.) |
|
Contact Current Rating |
Resistive load: 5A @ 30 VDC, 250 VAC, 110 VAC |
|
Contact Resistance |
100 milli-ohms (max.) |
|
Mechanical Endurance |
5,000,000 operations |
|
Electrical Endurance |
100,000 operations @ 5A resistive load |
|
Breakdown Voltage |
500 VAC |
|
Initial Insulation Resistance |
1,000 mega-ohms (min.) @ 500 VDC |
|
Note |
Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C. |
Physical Characteristics
|
Housing |
Plastic |
|
Dimensions |
27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in) |
|
Weight |
200 g (0.44 lb) |
|
Installation |
DIN-rail mounting, Wall mounting |
|
Wiring |
I/O cable, 16 to 26 AWG Power cable, 12 to 24 AWG |
Environmental Limits
|
Operating Temperature |
Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
|
Storage Temperature (package included) |
-40 to 85°C (-40 to 185°F) |
|
Ambient Relative Humidity |
5 to 95% (non-condensing) |
|
Altitude |
4000 m |
MOXA ioLogik E1200 Series Available Models
|
Model Name |
Input/Output Interface |
Digital Output Type |
Operating Temp. |
|
ioLogik E1210 |
16 x DI |
- |
-10 to 60°C |
|
ioLogik E1210-T |
16 x DI |
- |
-40 to 75°C |
|
ioLogik E1211 |
16 x DO |
Sink |
-10 to 60°C |
|
ioLogik E1211-T |
16 x DO |
Sink |
-40 to 75°C |
|
ioLogik E1212 |
8 x DI, 8 x DIO |
Sink |
-10 to 60°C |
|
ioLogik E1212-T |
8 x DI, 8 x DIO |
Sink |
-40 to 75°C |
|
ioLogik E1213 |
8 x DI, 4 x DO, 4 x DIO |
Source |
-10 to 60°C |
|
ioLogik E1213-T |
8 x DI, 4 x DO, 4 x DIO |
Source |
-40 to 75°C |
|
ioLogik E1214 |
6 x DI, 6 x Relay |
- |
-10 to 60°C |
|
ioLogik E1214-T |
6 x DI, 6 x Relay |
- |
-40 to 75°C |
|
ioLogik E1240 |
8 x AI |
- |
-10 to 60°C |
|
ioLogik E1240-T |
8 x AI |
- |
-40 to 75°C |
|
ioLogik E1241 |
4 x AO |
- |
-10 to 60°C |
|
ioLogik E1241-T |
4 x AO |
- |
-40 to 75°C |
|
ioLogik E1242 |
4 DI,4 x DIO,4 x AI |
Sink |
-10 to 60°C |
|
ioLogik E1242-T |
4 DI,4 x DIO,4 x AI |
Sink |
-40 to 75°C |
|
ioLogik E1260 |
6 x RTD |
- |
-10 to 60°C |
|
ioLogik E1260-T |
6 x RTD |
- |
-40 to 75°C |
|
ioLogik E1262 |
8 x TC |
- |
-10 to 60°C |
|
ioLogik E1262-T |
8 x TC |
- |
-40 to 75°C |
