Moxa ioLogik E1212 Universal Controllers Ethernet Remote I/O
Introduction
Moxa ioLogik E1212 supports the most common protocols for obtaining I/O data, allowing it to handle a wide range of applications. Most IT engineers utilize SNMP or RESTful API protocols, but OT engineers are more conversant with OT-specific protocols like Modbus and EtherNet/IP. Moxa's Smart I/O enables IT and OT engineers to easily obtain data from the same I/O device. Moxa ioLogik E1212 supports six protocols: Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and the Moxa MXIO library for IT experts. Moxa ioLogik E1212 gathers I/O data while also converting it to any of these protocols, allowing you to quickly and simply link your applications.
Features and Benefits
- Features include user-definable Modbus TCP Slave addressing, RESTful API for IIoT applications, EtherNet/IP Adapter, 2-port Ethernet switch for daisy-chain topologies, peer-to-peer communications, active communication with MX-AOPC UA Server, SNMP v1/v2c support, easy mass deployment and configuration with ioSearch software, and friendly configuration.
- ATEX Zone 2 certification for Class I Division 2 models.
- Operating temperature range of -40 to 75°C (-40 to 167°F).
Specifications
Input/Output Interface
|
Digital Input Channels |
ioLogik E1210 Series: 16 |
|
ioLogik E1212/E1213 Series: 8 |
|
|
ioLogik E1214 Series: 6 |
|
|
ioLogik E1242 Series: 4 |
|
|
Digital Output Channels |
ioLogik E1211 Series: 16 |
|
ioLogik E1213 Series: 4 |
|
|
Configurable DIO Channels (by jumper) |
ioLogik E1212 Series: 8 |
|
ioLogik E1213/E1242 Series: 4 |
|
|
Relay Channels |
ioLogik E1214 Series: 6 |
|
Analog Input Channels |
ioLogik E1240 Series: 8 |
|
ioLogik E1242 Series: 4 |
|
|
Analog Output Channels |
ioLogik E1241 Series: 4 |
|
RTD Channels |
ioLogik E1260 Series: 6 |
|
Thermocouple Channels |
ioLogik E1262 Series: 8 |
|
Isolation |
3k VDC or 2k Vrms |
|
Buttons |
Reset button |
Digital Inputs
|
Connector |
Screw-fastened Euroblock terminal |
|
Sensor Type |
Dry contact Wet contact (NPN or PNP) |
|
I/O Mode |
DI or event counter |
|
Dry Contact |
On: short to GND Off: open |
|
Wet Contact (DI to COM) |
On:10 to 30 VDC Off: 0 to 3 VDC |
|
Counter Frequency |
250 Hz |
|
Digital Filtering Time Interval |
Software configurable |
|
Points per COM |
ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels |
Digital Outputs
|
Connector |
Screw-fastened Euroblock terminal |
|
I/O Type |
ioLogik E1211/E1212/E1242 Series: Sink ioLogik E1213 Series: Source |
|
I/O Mode |
DO or pulse output |
|
Current Rating |
ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel |
|
Pulse Output Frequency |
500 Hz (max.) |
|
Over-Current Protection |
ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C |
|
Over-Temperature Shutdown |
175°C (typical), 150°C (min.) |
|
Over-Voltage Protection |
35 VDC |
Relays
|
Connector |
Screw-fastened Euroblock terminal |
|
Type |
Form A (N.O.) power relay |
|
I/O Mode |
Relay or pulse output |
|
Pulse Output Frequency |
0.3 Hz at rated load (max.) |
|
Contact Current Rating |
Resistive load: 5A @ 30 VDC, 250 VAC, 110 VAC |
|
Contact Resistance |
100 milli-ohms (max.) |
|
Mechanical Endurance |
5,000,000 operations |
|
Electrical Endurance |
100,000 operations @ 5A resistive load |
|
Breakdown Voltage |
500 VAC |
|
Initial Insulation Resistance |
1,000 mega-ohms (min.) @ 500 VDC |
|
Note |
Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C. |
Physical Characteristics
|
Housing |
Plastic |
|
Dimensions |
27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in) |
|
Weight |
200 g (0.44 lb) |
|
Installation |
DIN-rail mounting, Wall mounting |
|
Wiring |
I/O cable, 16 to 26 AWG Power cable, 12 to 24 AWG |
Environmental Limits
|
Operating Temperature |
Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
|
Storage Temperature (package included) |
-40 to 85°C (-40 to 185°F) |
|
Ambient Relative Humidity |
5 to 95% (non-condensing) |
|
Altitude |
4000 m |
Moxa ioLogik E1212 Available Models
|
Model Name |
Input/Output Interface |
Digital Output Type |
Operating Temp. |
|
ioLogik E1210 |
16 x DI |
- |
-10 to 60°C |
|
ioLogik E1210-T |
16 x DI |
- |
-40 to 75°C |
|
ioLogik E1211 |
16 x DO |
Sink |
-10 to 60°C |
|
ioLogik E1211-T |
16 x DO |
Sink |
-40 to 75°C |
|
ioLogik E1212 |
8 x DI, 8 x DIO |
Sink |
-10 to 60°C |
|
ioLogik E1212-T |
8 x DI, 8 x DIO |
Sink |
-40 to 75°C |
|
ioLogik E1213 |
8 x DI, 4 x DO, 4 x DIO |
Source |
-10 to 60°C |
|
ioLogik E1213-T |
8 x DI, 4 x DO, 4 x DIO |
Source |
-40 to 75°C |
|
ioLogik E1214 |
6 x DI, 6 x Relay |
- |
-10 to 60°C |
|
ioLogik E1214-T |
6 x DI, 6 x Relay |
- |
-40 to 75°C |
|
ioLogik E1240 |
8 x AI |
- |
-10 to 60°C |
|
ioLogik E1240-T |
8 x AI |
- |
-40 to 75°C |
|
ioLogik E1241 |
4 x AO |
- |
-10 to 60°C |
|
ioLogik E1241-T |
4 x AO |
- |
-40 to 75°C |
|
ioLogik E1242 |
4 DI, 4 x DIO, 4 x AI |
Sink |
-10 to 60°C |
|
ioLogik E1242-T |
4 DI, 4 x DIO, 4 x AI |
Sink |
-40 to 75°C |
|
ioLogik E1260 |
6 x RTD |
- |
-10 to 60°C |
|
ioLogik E1260-T |
6 x RTD |
- |
-40 to 75°C |
|
ioLogik E1262 |
8 x TC |
- |
-10 to 60°C |
|
ioLogik E1262-T |
8 x TC |
- |
-40 to 75°C |
Hot Tags: moxa iologik e1212, China, wholesale, online, order, moxa awk 1131a, moxa eds 510a, moxa eds208a, Moxa NPort IA5150A, switch ethernet moxa, Moxa SFP-1GLXLC-T
