Layer 3 core switch function configuration

When planning the industrial ring network of a coal mine, a Layer 2 switch is usually used underground or on the ground to form a ring, which is mainly used to build high-speed data forwarding within the local area network. The data center uses a Layer 3 core switch, which combines the functions of switching and routing to provide cross-segment connections and services between the production network and the administrative network.
Layer 3 core switches generally support static and dynamic routing protocols to implement routing functions. The following is an example of configuring the Layer 3 functions of a Moxa Layer 3 core switch.
Layer 3 switch

Layer 2 switch
Diagnostics
Monitoring

Moxa Layer 3 and Layer 2 switches do not have a "Layer 3 configuration menu". Layer 3 switches can achieve cross-VLAN communication, so they are based on VLANs. Therefore, VLANs must be created before the IP gateway can be configured.
First configure VLAN

Add VLAN IF gateway address

Routing: static routing
Configuring Static Routes

Gateway Redundancy VRRP Settings
Gateway Redundancy Configuration

Limited commonly used functions This article simply operates the three-layer function. If the dual-core high-redundancy master-slave configuration can be used as a VRRP redundant gateway, even if one fails completely, the other can be fully functional. At the same time, the border routing also needs to be designed with high reliability routing design to meet high reliability.


