Weidmuller VPU PV II 3 600 2857060000
Weidmuller VPU PV II 3 600 2857060000

Weidmuller VPU PV II 3 600 2857060000

Genuine Weidmuller VPU PV II 3 600 2857060000 3‑pole 600 V DC Type‑2 PV surge arrester, TS35 DIN‑rail. Visual status indicator, request wholesale quote.
Send Inquiry

Weidmuller VPU PV II 3 600 2857060000

 

Products Description

Weidmuller VPU PV II 3 600 order‑number 2857060000 is a 3‑pole Type‑2 surge‑protection device designed for 600 V DC photovoltaic systems. Installed on TS35 DIN‑rail inside PV combiner boxes and solar control cabinets, it protects PV‑side DC circuits against lightning‑induced surges and transient over‑voltages. It features visual status indication: green for normal operation, red for defective arrester requiring replacement. This model does not include remote signalling contact.

Xiamen Tongkong Technology supplies only 100% Genuine Brand‑New Weidmuller VPU PV II 3 600 2857060000 sourced via authorized supply channels. Each unit ships with original factory packaging and full GTIN traceability. Beyond standard VPU‑series surge‑protection products, our procurement team delivers one‑stop global sourcing for hard‑to‑find and obsolete Weidmuller photovoltaic‑protection components.

The SPD has total discharge current 50 kA (8/20 µs), single‑path In=20 kA, protection‑level Up ≤2 kV, response‑time ≤25 ns. It complies with EN 61643‑31 and EN 50539‑11. Screw terminals accept conductors 1.5‑35 mm², tightening torque range 3‑4.5 Nm, recommended stripping‑length 18 mm. Operating altitude limits: ≤2000 m for grounded PV systems; ≤4000 m for ungrounded PV systems. IP20 rating for cabinet‑only installation, black‑orange housing with UL94 V‑0 flammability.

Batch‑level compliance validation covers RoHS and REACH rules before stock‑in; no SVHC substance exceeds 0.1 wt%. Factory packing quantity is one unit per lot for solar‑plant combiner‑box projects.

 

 

 

Features and Benefits

Weidmuller VPU PV II 3 600 2857060000 3‑pole Type‑2 PV DC surge‑protection device (SPD)

Max PV DC voltage 600 V; total discharge current 50 kA (8/20 µs); protection level ≤2 kV

TS35 DIN‑‑rail mount; IP20; visual LED status (green‑OK / red‑fault); no remote signalling contact

Screw‑connection 1.5‑35 mm²; torque 3‑4.5 Nm; stripping‑length 18 mm

Operating temp‑40 °C ~ +85 °C; compliant EN 61643‑31 / EN 50539‑11

Pollution severity 2, surge‑voltage category III; UL94 V‑0; black‑orange housing

RoHS compliant without exemption; no REACH SVHC >0.1 wt%; factory pack 1 piece

100% genuine brand‑new Weidmuller surge‑protection stock, reply within 24 working hours

 

 

datasheet

 

Parameter Value
Brand Weidmuller
Model Number VPU PV II 3 600
Order No. 2857060000
GTIN(EAN) 4064675537427
Product Type 3‑pole Type‑2 photovoltaic DC surge‑protection device (SPD)
Mounting TS35 DIN‑rail
Enclosure rating IP20
Rated PV DC voltage 600 V
SPD Type T2 / Type II
Total discharge current Itotal (8/20 µs) 50 kA
Nominal discharge current In (8/20 µs) 20 kA
Protection level Up (+/‑ , ‑/PE , +/PE) ≤ 2 kV
Response time ≤ 25 ns
Short‑circuit current ISCPV 11000 A
Visual status indicator Green=OK; Red=defective, replace
Remote signalling contact Not available
Connection type Screw connection
Stripping length 18 mm
Tightening torque 3 … 4.5 Nm
Conductor range 1.5‑35 mm² (solid:1.5‑16 mm²; stranded:1.5‑25 mm²)
Housing colour Black / orange
UL94 flammability V‑0
Width × Height × Depth 54 mm ×96 mm ×75 mm
Net weight per unit 347 g
Pack quantity 1 item
Operating temperature ‑40 °C … +85 °C
Storage temperature ‑40 °C … +85 °C
Relative humidity 5‑95 % non‑condensing
Max operating altitude (grounded PV) ≤ 2000 m
Max operating altitude (ungrounded PV) ≤ 4000 m
Pollution severity 2
Surge‑voltage category III
Applicable standards EN 61643‑31; EN 50539‑11
RoHS Compliance Compliant without exemption
REACH SVHC No SVHC above 0.1 wt%

 

 

 

 

 

 

Hot Tags: weidmuller vpu pv ii 3 600 2857060000, China, wholesale, online, order, weidmuller 1014000000, Weidmuller UR20 8DO P 1315240000, ur20 4ai ui 16, hdc he 16 fs, 430600000, wdu 70 95