Moxa ioLogik E1241 Industrial Standard Universal Controllers Ethernet Remote I/O

Introduction

Moxa ioLogik E1241 universal controller supports commonly used protocols for retrieving I/O data, making it capable of handling a wide variety of applications. SNMP and RESTful API protocols are frequently used by IT engineers, while OT engineers are more familiar with OT-based protocols, such as Modbus and EtherNet/IP. Moxa's Smart I/O enables both IT and OT engineers to conveniently retrieve data from the same I/O device. The ioLogik E1200 Series supports six different protocols, including Modbus TCP, EtherNet/IP, and Moxa AOPC for OT engineers, as well as SNMP, RESTful API, and Moxa MXIO library for IT engineers. It retrieves I/O data and converts it to any of these protocols simultaneously, making it easy to connect your applications.

Features and Benefits

Modbus TCP Slave addresses can be defined by the user. Restful API for IIoT applications.
Supports The EtherNet/IP adapter is a 2-port Ethernet switch designed for daisy-chain topologies.
Peer-to-peer communication saves both time and wiring costs.
Active communication with the MX-AOPC UA server. SNMP v1/v2C
The ioSearch tool allows for easy mass deployment and configuration.
Features include web-based configuration, MXIO library for Windows and Linux, and ATEX Zone 2 certification.
Wide operating temperature variants are provided for -40 to 75°C (-40 to 167°F) situations.

Specifications

Input/Output Interface

Digital Input Channels		ioLogik E1210 Series: 16 ioLogik E1212/E1213 Series: 8 ioLogik E1214 Series: 6 ioLogik E1242 Series: 4
Digital Output Channels		ioLogik E1211 Series: 16 ioLogik E1213 Series: 4
Configurable DIO Channels (by jumper)		ioLogik E1212 Series: 8 ioLogik E1213/E1242 Series: 4
Relay Channels		ioLogik E1214 Series: 6
Analog Input Channels		ioLogik E1240 Series: 8 ioLogik E1242 Series: 4
Analog Output Channels		ioLogik E1241 Series: 4
RTD Channels		ioLogik E1260 Series: 6
Thermocouple Channels	ioLogik E1262 Series: 8
Isolation	3k VDC or 2k Vrms
Buttons	Reset button

Digital Inputs

Connector	Screw-fastened Euroblock terminal
Sensor Type	Dry contact Wet contact (NPN or PNP)
I/O Mode	DI or event counter
Dry Contact	On: short to GND Off: open
Wet Contact (DI to COM)	On:10 to 30 VDC Off: 0 to 3 VDC
Counter Frequency	250 Hz
Digital Filtering Time Interval	Software configurable
Points per COM	ioLogik E1210/E1212 Series: 8 channels ioLogik E1213 Series: 12 channels ioLogik E1214 Series: 6 channels ioLogik E1242 Series: 4 channels

Digital Outputs

Connector	Screw-fastened Euroblock terminal
I/O Type	ioLogik E1211/E1212/E1242 Series: Sink ioLogik E1213 Series: Source
I/O Mode	DO or pulse output
Current Rating	ioLogik E1211/E1212/E1242 Series: 200 mA per channel ioLogik E1213 Series: 500 mA per channel
Pulse Output Frequency	500 Hz (max.)
Over-Current Protection	ioLogik E1211/E1212/E1242 Series: 2.6 A per channel @ 25°C ioLogik E1213 Series: 1.5A per channel @ 25°C
Over-Temperature Shutdown	175°C (typical), 150°C (min.)
Over-Voltage Protection	35 VDC

Relays

Connector	Screw-fastened Euroblock terminal
Type	Form A (N.O.) power relay
I/O Mode	Relay or pulse output
Pulse Output Frequency	0.3 Hz at rated load (max.)
Contact Current Rating	Resistive load: 5A @ 30 VDC, 250 VAC, 110 VAC
Contact Resistance	100 milli-ohms (max.)
Mechanical Endurance	5,000,000 operations
Electrical Endurance	100,000 operations @ 5A resistive load
Breakdown Voltage	500 VAC
Initial Insulation Resistance	1,000 mega-ohms (min.) @ 500 VDC
Note	Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.

Physical Characteristics

Housing	Plastic
Dimensions	27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)
Weight	200 g (0.44 lb)
Installation	DIN-rail mounting, Wall mounting
Wiring	I/O cable, 16 to 26 AWG Power cable, 12 to 24 AWG

Environmental Limits

Operating Temperature	Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature (package included)	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
Altitude	4000 m

Moxa ioLogik E1200 Series Available Models

Model Name	Input/Output Interface	Digital Output Type	Operating Temp.
ioLogik E1210	16 x DI	-	-10 to 60°C
ioLogik E1210-T	16 x DI	-	-40 to 75°C
ioLogik E1211	16 x DO	Sink	-10 to 60°C
ioLogik E1211-T	16 x DO	Sink	-40 to 75°C
ioLogik E1212	8 x DI, 8 x DIO	Sink	-10 to 60°C
ioLogik E1212-T	8 x DI, 8 x DIO	Sink	-40 to 75°C
ioLogik E1213	8 x DI, 4 x DO, 4 x DIO	Source	-10 to 60°C
ioLogik E1213-T	8 x DI, 4 x DO, 4 x DIO	Source	-40 to 75°C
ioLogik E1214	6 x DI, 6 x Relay	-	-10 to 60°C
ioLogik E1214-T	6 x DI, 6 x Relay	-	-40 to 75°C
ioLogik E1240	8 x AI	-	-10 to 60°C
ioLogik E1240-T	8 x AI	-	-40 to 75°C
ioLogik E1241	4 x AO	-	-10 to 60°C
IoLogik E1241-T	4 x AO	-	-40 to 75°C
IoLogik E1242	4 DI, 4 x DIO, 4 x AI	Sink	-10 to 60°C
IoLogik E1242-T	4 DI, 4 x DIO, 4 x AI	Sink	-40 to 75°C
IoLogik E1260	6 x RTD	-	-10 to 60°C
ioLogik E1260-T	6 x RTD	-	-40 to 75°C
ioLogik E1262	8 x TC	-	-10 to 60°C
ioLogik E1262-T	8 x TC	-	-40 to 75°C