Hirschmann RS20-0800T1T1SDAEHH

Hirschmann RS20-0800T1T1SDAEHH

Hirschmann RS20-0800T1T1SDAE enables customers to select between a small and modular switch, as well as port density, backbone type, speed, temperature ratings, conformal coating, and numerous industry standards. Both small and flexible systems have redundant power inputs and a fault relay (activated by a loss of power and/or port connectivity).
Send Inquiry

Hirschmann RS20-0800T1T1SDAE Managed Switch

 

Introduction

 

Hirschmann RS20-0800T1T1SDAE enables customers to select between a small and modular switch, as well as port density, backbone type, speed, temperature ratings, conformal coating, and numerous industry standards. Both small and flexible systems have redundant power inputs and a fault relay (activated by a loss of power and/or port connectivity). Only the managed version has media/ring redundancy, multicast filtering/IGMP snooping, VLAN support, port mirroring, network diagnostics, and port management. A small platform that can accommodate up to 24 ports in 4.5 inches of DIN rail. All ports have a maximum speed of 100 Mbps.

 

Fast Ethernet Ports with or without PoE. The RS20 small OpenRail managed Ethernet switches may support port densities ranging from 4 to 25 and come with a variety of Fast Ethernet uplink connections, including all copper, 1, 2, or 3 fiber ports. Fiber interfaces are available in either multimode or singlemode. Gigabit Ethernet ports with or without PoE. The RS30 tiny OpenRail controlled Ethernet switches may support port densities ranging from 8 to 24, including 2 Gigabit ports and 8, 16, or 24 Fast Ethernet ports. The setup comprises two gigabit ports with TX or SFP sockets. The RS40 small OpenRail controlled Ethernet switches can support 9 Gigabit ports. The configuration has four Combo Ports (10/100/1000BASE TX RJ45 with FE/GE-SFP slot) and five 10/100/1000BASE TX RJ45 ports.

 

Product description

 

Description

Managed Fast-Ethernet-Switch for DIN rail store-and-forward-switching, fanless design; Software Layer 2 Enhanced

Part Number

943434021

Port type and quantity

8 ports in total: 6 x standard 10/100 BASE TX, RJ45; Uplink 1: 1 x 10/100BASE-TX, RJ45; Uplink 2: 1 x 10/100BASE-TX, RJ45

 

More Interfaces

Power supply/signaling contact

1 x plug-in terminal block, 6-pin

V.24 interface

1 x RJ11 socket

USB interface

1 x USB to connect auto-configuration adapter ACA21-USB

 

Network size - length of cable

Twisted pair (TP)

Port 1 - 6: 0 - 100 m \\\ Uplink 1: 0 - 100 m \\\ Uplink 2: 0 - 100 m

 

Network size - cascadibility

Line - / star topology

Ring structure (HIPER-Ring) quantity switches

any

50 (reconfiguration time 0.3 sec.)

 

Power requirements

Operating Voltage

12/24/48V DC (9,6-60)V and 24V AC (18-30)V (redundant)

Power consumption

max. 7.7 W

Power output in BTU (IT)/h

max. 26.3

 

Software

Switching

Disable Learning (hub functionality), Independent VLAN Learning, Fast Aging, Static Unicast/Multicast Address Entries, QoS / Port Prioritization (802.1D/p), TOS/DSCP Prioritization, Egress Broadcast Limiter per Port, Flow Control (802.3X), VLAN (802.1Q), IGMP Snooping/Querier (v1/v2/v3)

Redundancy

HIPER-Ring (Manager), HIPER-Ring (Ring Switch), Media Redundancy Protocol (MRP) (IEC62439-2), Redundant Network Coupling, RSTP 802.1D-2004 (IEC62439-1), RSTP Guards, RSTP over MRP

Management

TFTP, LLDP (802.1AB), V.24, HTTP, Traps, SNMP v1/v2/v3, Telnet

Diagnostics

Management Address Conflict Detection, Address Relearn Detection, Signal Contact, Device Status Indication, LEDs, Syslog, Duplex Mismatch Detection, RMON (1,2,3,9), Port Mirroring 1:1, Port Mirroring 8:1, System Information, Self-Tests on Cold Start, SFP Management, Switch Dump

AutoConfiguration Adapter ACA11 Limited Support (RS20/30/40, MS20/30), Automatic Configuration Undo (roll-back), Configuration Fingerprint, BOOTP/DHCP Client with

Configuration

Auto-Configuration, AutoConfiguration Adapter ACA21/22 (USB), HiDiscovery, DHCP Relay with Option 82, Command Line Interface (CLI), Full-featured MIB Support, Web-based Management, Context-sensitive Help

Security

IP-based Port Security, MAC-based Port Security, Access to Management restricted by VLAN, SNMP Logging, Local User Management, Password change on first login

Time synchronisation

SNTP Client, SNTP Server

Industrial Profiles

EtherNet/IP Protocol, PROFINET IO Protocol

 

product-500-500
product-500-500
product-500-500